On the „Connect To” window select the port you are using (I use COM1) then click on „Configure”.You can use any name here, it is not important at all
Now, if you have all of that, do EXACTLY this way: Optional: A good UPS, to avoid any data loss. You will also need a good firmware version. You can download a good firmware for your LG Tv model, from the LG site. Here is how you must wire the whole thing: A soldering iron for making connections A disposable USB cable with reasonable length (I found a 2 meters long one) Also, any 3 wired cable will do If you don’t have one laying around, you could make one. If you have Windows XP, you probably already have this. If you made a bad firmware upgrade for some LG TV series, you could recover the TV with a few steps…from a RS232 – serial console!
